User Manual

Step 2 Launching AVS-Monitor
7
③ If devices do not appear as intended, recheck physical connections, and press the “Reset ES
Network” button.
Configuring AVS -Monitor
The first time you use AVS-Monitor, you must turn AuviTran service ON and select the
network adapter which is connected to your EtherSound network.
From Windows Start Menu, select
Programs >> AuviTran >> AVS-Monitor >> AVS-Control Panel
In the Status tab,
①In the Network Adapter box, select the network adapter which is connected to
your EtherSound network.
②Press the “Turn ON” button.
Other settings can be left at their default values. For details on AVS -Control Panel
settings, refer to AVS-Monitor USER’S MANUAL available from the AuviTran Web site.