User Manual

Step 6 Remote Head Amp Control
38
Head Amp Control with Multiple Receiving Devices
The previous section explains the procedure for setting up a data tunnel between one
controlling device and one receiving device. If there is more than one device that needs to
receive HA control data, create a chain of data tunnels using the same procedure for a
single tunnel for each link of the chain.
The unicast destination settings for each device in the above example are as follows:
Unicast destination of Controller: Device #1
Unicast destination of Device #1: Device #2
Unicast destination of Device #2: Controller
Be sure to create a data tunnel from the final device back to the controller.
The order of the unicast chain does not have to be the same as the physical connection order
of devices.