User Manual

Step 6 Remote Head Amp Control
37
Head Amp Control with AVY16-ES / AV Y16 -ES100
When controlling head amps with AVY16-ES, AVY 16-ES must be the Primary Master.
Select the destination device and press Start button as shown in the diagram below,
In the control tab of the receiving devic
e, select "Slave" as the Serial Communication Mode.
When using AVY16-ES, there can be only one receiving device on the entire system.
When using AVY16-ES100, as with Yamaha’s MY16-ES64, Unicast is used as the Serial
Communication Mode, and there can be multiple receiving devices on the system.
(Refer to the next page for details.)