User Manual

Step 4 Wordclock Settings
17
Selection of Sampling Rate
The dip switch “SW2” on MY16-ES64 must be set to “48K” (when using 44.1/48 kHz) or “96K”
(when using 88.2/96 kHz). In this example, since we are using 48 kHz, set SW2 to “48K”.
Note: The choice between 44.1 and 48 kHz or 88.2 and 96 kHz is made by changing the
settings of the device hosting MY16-ES64. The same dip switch setting must be made for
all MY16-EX cards connected to MY16-ES64.