User Manual

M7CL V3 Editor Owner’s Manual
78
SENDS ON FADER mode enables you to adjust the send level to the MIX/MATRIX bus using the fader. In this mode,
the signals sent from all input channels to a specific MIX/MATRIX bus can be adjusted simultaneously.
Use the SENDS ON FADER button in the Master window to switch this mode on and off.
To display this window, do one of the following:
• Select [Sends on Fader] in the [Windows] menu.
•Click the SENDS ON FADER button in the Master window.
In SENDS ON FADER mode, the color and function of the [ON] button and the fader in the Overview window will
change.
Click the button (in the Sends On Fader window) for the MIX/MATRIX bus for which you want to adjust the send
level. Then switch the send level off or on, and adjust the send level using the [ON] button and fader for the input
channel displayed in the Overview window.
[ON] button
Purple Send is on.
Gray Send is off.
Fader
Purple The corresponding channel is on.
Gray The corresponding channel is off.
Sends On Fader window