Owner`s manual

Operation
42
board motor or close the fuel cock.
3. Press the power trim and tilt switch/
power tilt switch “” (up) until the out-
board motor has tilted up completely.
4. Push the tilt support knob into the clamp
bracket or pull the tilt support lever to-
ward you to support the engine.
WARNING
EWM00260
After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
in the power trim and tilt unit loses pres-
sure.
5. If the trim rods equipped: once the out-
board motor is supported with the tilt
support lever, press the power trim and
tilt switch “” (down) to retract the trim
rods.
CAUTION:
ECM00250
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
UP
ZMU01954
ZMU01886
ZMU01884