Owner`s manual

Operation
48
EMU27882
Adjusting trim angle
Power trim and tilt models
WARNING
EWM00751
● Be sure all people are clear of the out-
board motor when adjusting the tilt an-
gle, also be careful not to pinch any
body parts between the drive unit and
clamp bracket.
●
Use caution when trying a trim position
for the first time. Increase speed gradu-
ally and watch for any signs of instabil-
ity or control problems. Improper trim
angle can cause loss of control.
●
If equipped with a power trim and tilt
switch located on the bottom cowling,
use the switch only when the boat is at
a complete stop with the engine off. Do
not adjust the trim angle with this
switch while the boat is moving.
Adjust the outboard motor trim angle using
the power trim and tilt switch.
1. Trim operating angle
1
ZMU04718
1. Power trim and tilt switch
1. Power trim and tilt switch
1. Power trim and tilt switch
ZMU04601
DN
UP
1
UP
DN
ZMU04615
1