User Manual

ManualsBrandsYamaha ManualsMusic LabsLC4 Music Lab

Installation Guide

Summary of content (8 pages)

PAGE 1
Installation Guide
PAGE 2
Yamaha LC4 Installation Guide Contents Page LC4 Installation List of LC4 Controller Parts . . . . . . . . . . . . . . . . . 1 Step 1: Positioning of Instruments in Class . . . . . . 2 Step 2: Standard Installation of LC4 . . . . . . . . . . . 3 Split Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 LC4 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other Optional Items . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
LC4 Installation List of LC4 Controller System Parts LC4 Class Hub with power adapter (Qty 1) m usic lab hub Instrument Box (Qty 9) Stereo Instrument Cables (Qty 9) IBX4 INSTRUMENT BOX LC4 Controller Unit (Qty 1) 9 17 25 33 41 10 18 26 34 42 11 19 27 35 43 12 20 28 36 44 13 21 29 37 45 14 22 30 38 46 15 23 31 39 47 16 24 32 40 48 Stereo Headphones with Microphones (Qty 9) RJ45 Lab Connector Cable 10 meters (Qty 10) Velcro strip pairs for Instrument Boxes (Qty 9) Note: If installing more than
PAGE 4
Step 1: Positioning of Instruments in Classroom 1. With input from the instructor, determine where instruments will be placed. Some teachers want to see student hand positions in keyboard labs. Others want all students facing forward. 2. Determine the numbering system for instruments. The student buttons on the CONTROLLER are labeled 1-8 left-to-right. It might be helpful to arrange students in that order from the teacher’s perspective. (See illustration below) 3.
PAGE 5
Step 2: Standard Installation LC4 1. Determine the position of the Hub in the room. Keep in mind that parts of the LC4 Lab must be connected to the hub so several cables will run to it. 2. Connect the headphone out of all instruments to the FROM INSTRUMENT input on their respective Instrument Boxes using the stereo instrument cables. 3. Plug a headset into the STUDENT 1 jacks on each Instrument Box. Plugs are marked with headphone and mic icons.
PAGE 6
Split Mode If you would like to have two students at each instrument working independently of each other, all that is required is setting your instrument properly and adding additional Yamaha CM500 headset microphones to your system. Each student instrument must have the following settings made for SPLIT MODE to work properly: 1. Split Keyboard into two voices (sometimes called LEFT voice). 2. Octave shift both the RIGHT and LEFT voices.
PAGE 7
Other Optional Items Controller 1. LC4 Wireless Kit. Connect the ethernet port of the hub to the pre-configured Wi-Fi Router, and then connect the tablet (iPad) wirelessly to this network for iPad LC4 Controller use. Detailed setup and configuration instructions are included with the LC4 Wireless Kit. Option 1: LC4 Wireless Kit 2. External Powered Speakers. If it’s necessary that the lab be heard in the room without headphones, external powered speakers can be added. Con 3. Student Computers.