Service manual

ManualsBrandsYamaha ManualsAutomotiveJOGR JOGRR CS50M

ENG

ENGINE ASSEMBLY AND ADJUSTMENT

4-33

EAS00324

ASSEMBLING THE SECONDARY SHEAVE

1. Lubricate:

• secondary fixed sheave’s inner surface

• secondary sliding sheave’s inner surface

2. Install:

• secondary sliding sheave 

NOTE:

Take care that the lips of the oil seals do not

turn when the pulley wheel is installed.

3. Install:

• guide pin 

4. Lubricate:

• guide pin groove

• oil seal

(with the recommended lubricant)

5. Install:

• secondary sheave complete 

• spring

• clutch carrier 

• spacer (diameter = 30 mm, thickness = 2 ~

3 mm)

NOTE:

Attach the clutch spring holder and clutch

spring holder arm  onto the secondary she-

ave as shown. Then, compress the spring, and

tighten the clutch securing nut .

Recommended lubricant

assembly lube

Clutch spring holder

90890-01337







