User Manual

Preparation
User's Guide
TF StageMix
- 8 -
StageMix settings
Start StageMix.
The SELECT MIXER screen is displayed. The following are available from this screen.
• OFFLINE: allows you to view a demo of the StageMix features and user interface.
• CONNECT: allows you to select and connect to a TF series console that is connected to the same network.
Offline demo mode
Tap [OFFLINE] on the SELECT MIXER screen to use StageMix in demo mode, without connecting to a console. When using this
mode, you cannot use level meters, access scenes, etc.
Connecting to the console
If the iPad and console are connected to the same network, select the console and tap [CONNECT] to connect to the console.
When the maximum number of TF Editor and TF StageMix sessions (total: 3) are already connected to the TF series console, a
"restricted" mark is displayed to the left of the IP address. When you select a TF series console that has a "restricted" mark
displayed next to it and tap the CONNECT button, a message is displayed that indicates you cannot connect to the console.
After StageMix has received the necessary data from the console, the mixer window is displayed and you are ready to begin using
StageMix.
If StageMix cannot connect to the console, refer to the Troubleshooting section (page 41).
Network switching (V3.0 and later)
If using iOS 9.3 and later with TF StageMix V3.0 and later, you can connect to a network using a wired connection in addition to a
wireless connection. A Lightning to USB 3 Camera Adapter (or USB-C to USB Adapter) and an USB Ethernet Adapter are required
to use a wired connection.
You can switch between a wireless and wired connection when offline; you cannot switch while online.