User Manual

Yamaha Professional Audio QL StageMix V7 User Guide
Page 86
10.4 Show Send Levels in Meter Bridge
When this preference is ON, the send levels for the currently selected “MIX
ON FADERS” will appear in the “Navigation/Meter Bridge” in “SENDS ON
FADERS” mode. If this preference is OFF, the input levels will be displayed.
10.5 Enable Phantom Power Switching
When this preference is ON, phantom power for each input channel can be
turned On or Off while in GAIN mode in the Mixer window. If this preference is
OFF, phantom power indicators will be display-only.
10.6 Set EQ band to 0dB with Double-Tap
When this preference is ON, Parametric and Graphic EQ Gains can be set to
0dB by double-tapping on the EQ band.
10.7 Show dB Markings on Mixer
When this preference is ON, dB fader level markings will be displayed in the
main Mixer Screen.
10.8 Set DCA to 0dB with Double-Tap
When this preference is ON, a DCA fader can be set to exactly 0dB by double-
tapping on the fader cap.
10.9 Disable Screen Auto-Lock
When this preference is ON, the screen Auto-lock function of the iPad (as set
in the iPad’s settings menu) will be disabled whilst StageMix is running.
10.10 Cue Operation Mode
When Dual Cue Mode is active in the console, the Cue Operation Mode can
be selected between [CHANNEL] and [REMOTE] modes.
When [REMOTE] mode is active, StageMix will control the Cue B Bus
exclusively.
10.11 Cue A Mode
This option selects the Cue Mode when Dual Cue Mode is not active, or the
mode for Cue A when Dual Cue Mode is active.
When the [LAST CUE] button is highlighted yellow, only one channel can be
cued at a time. When [MIX CUE] is highlighted, multiple channels can be
cued simultaneously.
10.12 Cue B Mode
This option selects the Cue Mode for Cue B when Dual Cue Mode is active.
This option is not available if Dual Cue Mode is not active.
10.13 Solo in Place Mode
This allows Solo in Place mode to be enabled from StageMix. This option is
not available when [REMOTE] mode is active.