User Manual

Yamaha Professional Audio QL StageMix V7 User Guide
Page 36
5.2 PARAMETRIC EQ EDITING
(The screenshot above shows the EQ Editor screen with V4 QL console
firmware.)
The current channel’s Name, Color, Fader, Level Meters, [ON] and [CUE]
buttons are shown in the left column. At the bottom-left, there are “previous”
and “next” arrow buttons for navigating to different channels.
• Tap and release on either of these buttons to navigate up or down to the
next available channel.
• Press and hold either button to access an array of buttons that provide
direct navigation to any available input or output channel in the console.
Buttons above the channel strip section provide direct access to the Dynamics
editing screen for the currently selected channel. If a GEQ or 8-Band PEQ is
assigned to that channel, these buttons will also provide direct access to the
editing screen for those EQs. If the console is in Surround Mode, these
buttons will also provide direct access to the 5.1 panning editor.
Navigation between these screens follows this pattern:
PEQ <-> GEQ <-> 5.1 <-> DYN <-> PEQ <-> GEQ etc.
Note: the In/Out meters display the levels going In and Out of the EQ section.