User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Channel Strip section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon, and channel color
- Making HA (Head Amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- Signal flow for output channels
- Specifying the channel name, icon, and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Using the PORT TO PORT function
- Channel library operations
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, effects, and Premium Rack
- I/O devices and external head amps
- MIDI
- Recorder
- AFC IMAGE Control
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Custom fader bank
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Remount function to USB flash drives
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Setting up the Dante audio network
- Dante Device Lock
- Support for Dante Domain Manager
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the LED color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
- Warning/Error Messages
- Index
- Data List
- Table of Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/Output Characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Function Tree
V5.8 Reference Manual
4
Function Tree
Page numbers in parentheses ( ) are the page numbers of the
Owner’s Manual (booklet).
Main
SELECTED CHANNEL 6
OVERVIEW 12
FUNCTION ACCESS AREA (17)
CHANNEL PARAMETER
PATCH/NAME 17, 26, 51
GAIN/PATCH 28
1ch 28
8ch 30
CH1–32 32
CH33–64/ST IN 32
OUTPUT
Indication only
INPUT DELAY 41
8ch 42
CH1–32 42
CH33–64/ST IN 42
DELAY SCALE 42
INSERT/DIRECT OUT 20
1ch 20, 23
8ch 21, 23
HPF/EQ 59
1ch 59
8ch 61
CH1–32 62
CH33–64/ST IN 62
OUTPUT 62
DYNAMICS 64
1ch 64
KEY IN SOURCE SELECT 65
8ch 65
CH1–32 66
CH33–64/ST IN 66
OUTPUT 66
MIX SEND/MATRIX SEND 41
TO STEREO/MONO 52
8ch 52
CH1–32 53
CH33–64/ST IN 53
OUTPUT 53
SURROUND 44
LIBRARY
CHANNEL LIBRARY 49
EQ LIBRARY 66
DYNAMICS LIBRARY 66
GEQ/PEQ LIBRARY 162
EFFECT LIBRARY 162
Portico5033/Portico5043/Portico5045/U76/
Opt-2A/EQ-1A/DynamicEQ/Buss Comp 369/
MBC4 LIBRARY
162
DANTE INPUT PATCH LIBRARY 164
RACK
VIRTUAL RACK 130
RACK MOUNTER 133
GEQ EDIT 134
GEQ LINK 134
EFFECT RACK 145
EFFECT EDIT 145
EFFECT TYPE 145
PREMIUM RACK 151
PREMIUM RACK MOUNTER 151
PREMIUM RACK EDIT 152
AUTOMIXER 140
PARAMETRIC EQ 137
I/O DEVICE
DANTE PATCH 163
DANTE SETUP 163
DANTE INPUT PATCH 164
DANTE OUTPUT PATCH 165
I/O 166
REMOTE HA EDIT 171
DANTE OUTPUT PATCH 165
AMP 172
DANTE OUTPUT PATCH 165
WIRELESS 175
EXTERNAL HA 182
EXTERNAL HA PORT SELECT 183
EXTERNAL HA EDIT 183
INTERNAL HA 184
MONITOR
MONITOR 104
CUE 113
MONITOR 106
OSCILLATOR 121
TALKBACK 119
METER
INPUT METER 123
OUTPUT METER 123
RTA METER 125
SETUP
USER SETUP 209
PREFERENCE 219
USER DEFINED KEYS SETUP 221
USER DEFINED KEY SETUP (List) 221
USER DEFINED KNOBS SETUP 227
USER DEFINED KNOB SETUP (List) 227
CUSTOM FADER BANK/MAIN FADER 230
FADER ASSIGN SELECT 229
USER LEVEL/CREATE USER KEY 212
CREATE KEY 213
SAVE KEY 216
LOGIN 214