User Manual

Setup
V5.8 Reference Manual
230
USER SETUP window
(CUSTOM FADER BANK/MAIN FADER page)
1 Bank select buttons
Enable you to select a custom fader bank to which you want to assign a group of
channels.
2 Block indicators
Display the graphics of the top panel block and faders that are the current target for
editing.
The graphics vary depending on the console model.
QL5: A (MAIN only), B (16 faders x 2 channels, MAIN)
QL1: A (MAIN only), B (16 faders, MAIN)
For CUSTOM FADER BANK A1-4, only MAIN can be selected.
3 Fader select button
Selects the target fader. Press this button to select it, then press [SEL] keys on the top
panel to add the corresponding channels to the selected fader bank.
4 Fader assign select button
Opens the Fader assign select window, in which you can change the channel assigned
to the fader.
5 CLEAR ALL button
Clears all the current fader bank assignment. Pressing this button will open a
confirmation dialog box. Press OK to clear the assignment. Otherwise, press CANCEL to
return to the previous screen without changing the setting.
Custom fader bank settings for individual scenes
Custom fader bank settings can be stored/recalled for individual scenes. For details, refer to
“Using the Focus Recall function” on page 95.
NOTE
• Custom fader bank settings differ between models, and are not compatible. For example, scenes
stored by the QL5 cannot be recalled on the QL1.
• In addition, the user level affects storing/recalling of custom fader bank settings. For example, if
you are logged-in as a user or Guest, you cannot recall settings stored by the Administrator.
Precautions for when Loading Console Data
Custom fader bank settings are not only included in user settings, but in scene data as well.
The custom fader bank settings that are called up vary depending on the logged-in user, the
type of the loaded data, and the version. Please note the following points:
• If you load console data of the ALL type as Administrator, the custom fader bank settings
for the saved Administrator are called up.
If you load ALL data as Guest or another user, the custom fader bank settings for the saved
current scene are called up.
• If you load ALL data that was saved in CL V1.70 or earlier, since scenes do not include
custom fader bank settings, the custom fader bank settings for the current scene when the
load was performed are applied to all scenes. Therefore, before loading ALL data, we
recommend that you either change users to set the custom fader bank to the desired
setting, or that you enable Recall Safe for the custom fader bank.
1
5
3
2
4
Custom fader bank settings
QL1 console
StoreRecallStoreRecall
QL5
QL1
QL5 console