User Manual

Table Of Contents
I/O devices and external head amps
V5.8 Reference Manual
179
Access the GAIN/PATCH window.
Press the INPUT PORT button, and on the PORT SELECT window select the port to which
the output signal from the AXT400 is connected (OMNI 1).
This assigns the output signal from the AXT400 to the input channel, and at the same
time allows you to control and monitor the level of the AXT400 from the input channel.
Precautions
If the target device is unmounted, the parameters on the console return to their default
values. If a new device is mounted and patched, that device’s parameters are applied to the
console.
All port assignments for a rack are defeated only if the status of the rack is NO ASSIGN.
Regarding the control of each developer’s device, control parameters are not stored in
scenes and saved in console files.
For devices that can set both Dante Input Patch and Port Assign, if Dante Input Patch has
already been set, the Port Assign setting will be ignored.