User Manual

ShureWirelesswithYamahaCL/QL
www.yamahaproaudio.com
10
However, to change the latency setting, the Device View window must be opened:
either use the Device menu, or double-click on the device’s name. The Latency can
be changed in the Device Config tab. 1ms is the default setting which can be used
with many types of network. 250usec is the best choice when the microphones are
used by musicians with in-ear monitor systems.
Tip:
Both ULXD4D/Q and CL/QL devices have switches built in, so only one additional
network switch should be used in between these devices with 250usec latency
selected.