User Manual

QL Editor Owner’s Manual
87
5 CLEAR
These buttons clear all channels assigned to the corresponding DCA group. When you click one of these buttons a win-
dow will appear, asking you to confirm the operation. To execute the Clear operation, click the OK button.
MUTE GROUP ASSIGN page
Here you can specify the channels that will be assigned to mute groups 1–8. The upper part of the screen lets you assign
input channels to mute groups, and the lower part of the screen lets you assign output channels to mute groups.
1 Mute group
This area shows the mute group number.
2 Mute group name
This area shows the mute group name. Click this area to edit the name.
3 MUTE (MUTE GROUP CONTROL)
These buttons enable/disable each input channel or output channel mute group. If the mute groups are completely
muted, they are shown in red. If the dimmer levels for those groups are set in a non-default status, they are shown in
orange.
4 Grid
This grid lets you assign channels (horizontal rows) to mute groups (vertical columns.) Currently-patched grids are
indicated by a symbol. To enable or disable an assignment, click the desired grid.
5 MUTE SAFE ON
These buttons switch Mute Safe on/off for each channel. Channels for which this button is on will be excluded from
mute groups.
7
5
12 3 64