User Manual

Table Of Contents

QL Editor Owner’s Manual

Overview of QL Editor

QLEditor enables you to remotely control a Yamaha QL mixing console (such as QL5, or QL1; hereinafter collectively

called “QL” in this document). QLEditor also enables you to save the parameter settings on your computer.

Configuring QL Editor

❏ System Setup

To open the System Setup dialog box, choose [System Setup] from the [File] menu.

1 Network

Specify the IP Address of your QL console to com-

municate.

2 Model Select

Select the model of your QL (QL5/QL1) when QL

Editor is not synchronized with the QL console. If

QLEditor is synchronized with the QL console, the

model will automatically be selected and other

model options will be grayed out.

3 Channel Select/Sends On Fader

This checkbox enables you to specify whether or

not the QL console and QLEditor are linked to each

other for the following operations:

•Selecting channels

•Switching between normal mode and SENDS

ON FADER mode

• Switching between MIX and MATIRX in

SENDS ON FADER mode

•Selecting [CUE] buttons

If you do not check the box, the QL console and QLEditor will operate independently.

If the box is not checked, the [CUE] button will be hidden in each window.

4 Synchronization

This allows synchronization to be done automatically when a QLEditor file is loaded. This function is enabled by

default.

5 Window Control From Console

This option determines whether or not using the USER DEFINED KEYS on the console enables you to remotely open

and close the QLEditor windows.

6 Level Meter

This option specifies whether the level meter functionality will be enabled. By disabling the meter function you can

reduce the processing load caused by screen drawing and communication.

7 Confirmation

These check boxes specify whether a confirmation dialog box will appear when you store (Store Confirmation), recall

(Recall Confirmation), patch (Patch Confirmation), or make a patch change that would modify an existing patch (Steal

Patch Confirmation).

8 Administrator Password

Enter the Administrator password that was specified on the QL console. If this password is not entered correctly, it will

not be possible to synchronize from QLEditor to the QL console.

Getting Started

NOTE