User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
QL Editor Owner’s Manual
101
C CUSTOM BANK
If this button is turned on, the custom fader banks will be included in the recall target.
D PORT TO PORT PATCH
If this button is on, the PORT TO PORT patch settings will be specified as the recall target.
E PORT TO PORT HA
If this button is on, the PORT TO PORT HA settings will be specified as the recall target.
F DCA
These buttons specify the DCA groups that will be recalled by scene recall. If the ALL button is on, LEVEL, ON, and
DCA group names will be recalled by scene recall. If the LV/ON button is on, LEVEL and ON will be recalled by scene
recall. If the NAME button is on, DCA group names will be recalled by scene recall.
G GEQ RACK
If these buttons are on, the corresponding GEQ rack will be recalled by scene recall.
H EFFECT RACK
If these buttons are on, the corresponding EFFECT rack will be recalled by scene recall.
I PREMIUM RACK
If these buttons are on, the corresponding PREMIUM rack will be recalled by scene recall.
J BUS SETUP
If these buttons are on, the corresponding BUS SETUP will be recalled by scene recall.
K CH LINK
If this button is on, channel link settings will be recalled by scene recall.
L MUTE NAME
If this button is turned on, the mute group name will be included in the recall target.
M FADER BANK SELECT
If this button is turned on, the banks that have been selected in the fader block of the QL’s fader bank section will be
specified as the recall target.
N SET ALL
Turns on the buttons of all parameters.
O CLEAR ALL
Turns off the buttons of all parameters.