User Manual

Yamaha Professional Audio QL StageMix V8 User Guide
Page 35
4.12 DCA FADERS
Press the [DCA 1-8] or [DCA 9-16] button to access the console’s 16 DCAs. A
green LED will appear next to each DCA fader when it is set to exactly 0dB.
DCA faders can be quickly set to exactly 0dB by double-tapping on the fader if
the relevant Preference is On in the Setup screen (refer to 10.8
).
Double touch on the DCA Group name below any DCA Group fader to open
the keyboard to allow name and colour editing.
Press the [DCA 1-8] or [DCA 9-16] button again to exit the DCA fader bank
and return to the previously selected bank. Alternatively, press any bank in
the “Navigation/Meter Bridge” to directly access that fader bank.
4.13 DCA ASSIGN
Press the [ASN] button beside the fader track of any DCA Group fader to open
the member assignment screen for that DCA Group.
Once the DCA Group Assignment view is open, select the required member
channels from the grid, and use the channel type buttons at the bottom of the
screen to choose between mono input, stereo input and output channels.
The left/right arrive keys can be to navigate to other DCA Groups in numerical
order, to make further assignments.
Press and hold on the either left/right arrow key to open a direct navigation
pop-up to select any DCA Group for assignment.
The [CLEAR} button will clear all member assignments for the currently
selected DCA Group.
Press the [CLOSE] buttons to return to the DCA Group fader view.