User Manual
Table Of Contents
- Cover
- Contents
- Links from the Owner’s Manual
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- DTX-PRO Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- TRAINING Mode
- Connecting a Computer
- Troubleshooting
- Reference
83
DTX-PRO Reference Manual
KIT Mode
You can import an audio file to play as an Inst.
Select an audio file saved on a USB flash drive to import into the DTX-PRO.
1. Save the audio file from the computer to the root directory on a USB flash drive.
2. Connect a USB flash drive to the [USB TO DEVICE] terminal on the rear panel.
3. Press the button below “INST” ([F1]).
The Inst Selection screen appears.
Audio file conditions: wav format
• Note that some wav format audio files may not be imported.
• The DTX-PRO does not recognize the audio file if it is in a folder.
• You can also import an audio file as a voice. When doing so, you can play a different wave for each zone.
• In MENU/Job/User voice, you can import multiple audio files into a single user voice to play different waves in response to the velocity.
Playing imported audio files as Inst sounds
NOTE