User Manual
Table Of Contents
- Cover
- Contents
- Links from the Owner’s Manual
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- DTX-PRO Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- TRAINING Mode
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
34
DTX-PRO Reference Manual
TriggerTrigger
This section explains the “Trigger” settings in the menu. The characteristics of the trigger signals output from pads when they are played
depend on a range of different pad design factors.
The “Trigger” settings allow you to optimize trigger signals for each pad for processing by the DTX-PRO.
Select the appropriate pad type when you add or change pads. When you connect the pad to the [!2KICK/!32] jack, [yTOM3/u] jack,
[rTOM2/t] jack or [wTOM1/e] jack, make sure to change the input mode.
TRIGGER/SETTING
TRIGGER/SETTING/Input Mode
Input Mode
Sets how to use the mono × 2 input jack. Select “paired” when using a Drum Trigger (DT50S) or similar device.
MENU/Trigger
MENU/Trigger/Input Mode
Screen Parameter Settings Description
Tom1/Pad3 paired,
separate
Sets the [wTOM1/e] jack to use wTOM1 and
e trigger inputs as a set or separately.
Tom2/Pad5 Sets the [rTOM2/t] jack to use rTOM2 and
t trigger inputs as a set or separately.
Tom3/Pad7 Sets the [yTOM3/u] jack to use yTOM3 and
u trigger inputs as a set or separately.
Kick/Pad13 Sets the [!2KICK/!3] jack to use !2KICK and
!3 trigger inputs as a set or separately.
TRIGGER
Input Mode
Curve
Pad Type
Crosstalk