User Manual

10. SETTINGS screen
Here you can make various settings for STAGEPAS Editor.
① Knob Operation
Specifies how the knobs of STAGEPAS Editor will operate.
Rotary:：Edit the value by dragging in a circle around the shape of the knob. Clockwise increases the value, and
counterclockwise decreases the value.
Linear: Drag upward or right to increase the value, or downward or left to decrease the value.
Default value: Rotary
② Count Leader
Specifies the time until playback actually starts after you tap the Play button of MUSIC PLAYER.
Use the slider to adjust the setting in one-second steps for a range of 0–10 seconds.
If you specified Count Leader, a circle that makes one rotation in the specified time appears around the Play
button when you tap the Play button.
If you tap the PLAY button again during the count, playback will be canceled.
Default value: 0 seconds
③ Double Tap Operation
Turns double tap operation on/off. If this is on, you can reset a parameter of the EFFECT/EQ/PAN screen to its
default value by double-tapping it.
Default: ON
④ Cued Mode
Specifies the playback mode.
If this is on, playback pauses at the beginning of the next song when a song finishes playing.
If this is off, the next song plays back after a song finishes playing.
Default value: OFF
10. SETTINGS screen
22 |