User Manual

6. FADER screen
In this screen you can adjust the levels.
Like the main screen, this screen consists of a CHANNEL section and a MASTER section.
NOTE
• The faders of STAGEPAS Editor’s CHANNEL section control the digital level immediately after the
channel level of the STAGEPAS 1K unit. If either of these levels are lowered, there will be no sound
even if you raise one of the levels.
6.1. CHANNEL section
① Level meter
Indicates the input signal level in real time.
The level meter shows levels up to -18 dB in green, up to 0 dB in yellow, and in red if the signal is clipping.
② Fader
Indicates and sets the level.
Drag the fader area that you want to operate to change the value.
6. FADER screen
6.1. CHANNEL section | 11