User Manual

5. EFFECT/EQ/PAN screen
Here you can control the overall signal flow. You can shape the sound of the input sources, and view or edit
various settings.
When you connect to the STAGEPAS 1K, the front panel settings of the STAGEPAS 1K unit are reflected in
STAGEPAS Editor.
When you operate STAGEPAS Editor, the knob positions of the STAGEPAS 1K unit itself do not change, but the
unit will operate with the settings that you specify in STAGEPAS Editor.
When you operate the knobs of the STAGEPAS 1K unit, the settings of the knobs are applied. At this time, the
controllers in STAGEPAS Editor synchronize with the movements of the knobs.
This screen consists of a CHANNEL section and a MASTER section.
5.1. CHANNEL section
① REVERB LEVEL knob
Indicates and sets the reverb level sent from the channel. Double-tap to return to the default setting.
For this parameter, the white line indicates the value of STAGEPAS Editor, and the position of the knob on the
panel of the STAGEPAS 1K is shown as a dim color. (In the illustration below, it indicates 9 o’clock.)
The numeric value of the send level is shown below the knob.
Range: 0–100
5. EFFECT/EQ/PAN screen
8 | 5.1. CHANNEL section