User's Manual

Page 8/62 INTRODUCTION
1 INTRODUCTION
Thank you for selecting a NEXO GEO M6 Series Tangent Array System.
This manual is intended to provide you with necessary and useful information about your GEO M6
System, which includes the following products:
 GEO M620 is a 20° Tangent Array Module. It
comprises 1x6.5” (17cm) 8 ohms LF/MF driver and
1x1.5” voice coil, 1” Throat 16 Ohm HF Driver loaded
by a 15° Hyperboloid Reflective Wavesource™.
 GEO M6B is a Bass-Mid Reinforcement module for
Geo M620. It comprises 1x6.5” (17cm) 8 ohms LF/MF
driver ™.
 GEO M6 Accessory Range. a full range of
accessories that provides safe, flexible and simple
means of installing Geo M6 as single or multiple units
in fixed installation as well as in touring applications.
 GEO M6 modules are controlled, powered and
monitored by NXAMP4x1.For a complete description
of this controller, please refer to User Manual.
NXAMP DSP algorithms and parameters are fixed in
software and updated regularly: Please consult the
NEXO web site (www.nexo-sa.com) for the latest
software releases.
 NS-1 simulation software assists in the design and
implementation of vertical tangent GEO arrays.
Please consult the NEXO web site (www.nexo-
sa.com) for the latest software releases.
 Available for iPad and iPhone, NEXO NeMo provides
remote control over an NXAMP network from
anywhere in the venue, thanks to an intuitive and
graphically attractive user interface. NeMo is available
on iTunes.
Please devote your time and attention to reading this manual. A comprehensive understanding of GEO
theory, tangent arrays and specific features of GEO M6 will help you to operate your system at its full
potential.