User's Manual

ManualsBrandsYamaha ManualsloudspeakersYamaha GEO M6 User

GEO M6 SETUPS ON NEXO TD CONTROLLERS Page 11/62

4 GEO M6 SETUPS ON NEXO TD CONTROLLERS

4.1 NXAMP TDControllers

As of this manual printing date, load 3.22 features the setups listed in below table in the “NEXO

configurations” menu.

NEXO recommended setups

CH1

CH2

CH3

CH4

'M620-LS18 120Hz'

'1-3 Boxes'

LS18 (bridged with CH2)

N/A

M620

'M620-LS18 120Hz'

'4-12 Boxes'

LS18 (bridged with CH2)

N/A

M620

'M620-70Hz'

'4 Ch. 1-3 Boxes'

M620

'M620-70Hz'

'4 Ch. 4-12 Boxes'

M620

'M620-120Hz'

'4 Ch. 1-3 Boxes'

M620

'M620-120Hz'

'4 Ch. 4-12 Boxes'

M620

- Setups “1-3 Boxes” are to be used in small configuration (pole stand, lip fill, under-balcony);

- Setups “4-12 Boxes” are to be used in larger arrays – typically flown;

- Frequency value is high-pass filter cut-off point.

Additionally, “Custom configurations menu” allows to build any combination of NEXO speakers –

including GEO M6Bass with:

- Full phase compatibility from 20 Hz to 20kHz.

- Choice between 85 Hz and 120 Hz X-over point between Nexo LS or RS subwoofers and Geo M6.

NEXO Custom setups

M620 4-12 BOXES 70Hz-20kHz

M620 4-12 BOXES 85Hz-20kHz

M620 4-12 BOXES 120Hz-20kHz

M620 1-3 BOXES 70Hz-20kHz

M620 1-3 BOXES 85Hz-20kHz

M620 1-3 BOXES 120Hz-20kHz

M6B 70Hz-180Hz

M6B 85Hz-180Hz

Please consult www.nexo-sa.com for upgrade releases.