User Manual

Screen Items and Functions
5
Section Editing area of the Main window
q Section: Shows the section name being edited. You can also select the section to be edited by this.
w Wave file: Shows the audio file name which is assigned to the section being edited. You can also change the assigned
audio file.
[+]: Assign a new audio file to the section (import).
[-]: Remove the current audio file assignment.
e Manual: When this is checked, you can manually enter all settings for waveform assignment of the section.
r Waveform area: Shows the waveform of the assigned audio file and the range assigned to the section being edited. You
can select the range of assignment by mouse operations.
The range assigned to the section is shown in yellow. When the “Manual” checkbox is not checked, the grid of beats based
on the analysis is shown on the waveform. If the same audio file is assigned to other sections, ranges of other sections are
shown at the bottom of this area.
t Start time / End time: Shows the start and end times of the waveform assigned range in the audio file. You can change
it by direct input.
NOTE
• When this is checked, there are also changes to the display, which the grid of beats (analysis result) on the waveform area will not be
displayed, and some operation items will be disabled, etc.
• When two or more audio files are used in one project, the “Manual” checkboxes of all sections are checked automatically.
NOTE
If you hold down the Shift key when the mouse cursor is on the waveform area, you can perform other operations to the yellow range
by using the mouse. When the cursor is in the range, you can move the range. When the cursor is left or right of the range, you can
change the border of the range.
NOTE
If the “Manual” checkbox is not checked, the “Start time” and “End time” will be automatically adjusted to the beat grid closest to the
input value.
q
r
w
t
y
e
oi
u