Motorcycle User Manual
Table Of Contents
- Introduction
- Table of Contents
- Safety Information
- Description
- Instrument and Control Functions
- Pre-Operation Checks
- Periodic Maintenance and Minor Repair
- Owner's tool kit
- Periodic maintenance chart for the emission control system
- General maintenance and lubrication chart
- Checking the spark plugs
- To change the engine oil
- Coolant
- Adjusting the throttle cable free play
- Tires
- Clutch lever free play
- Checking the front and rear brake pads
- Checking the brake and clutch fluid levels
- Checking and lubricating the cables
- Checking the steering
- Battery
- Replacing fuses
- Replacing a headlight bulb
- Troubleshooting
- Motorcycle Care and Storage
- Specifications
- Consumer Information
- Index
INSTRUMENT AND CONTROL FUNCTIONS
3-17
3
below and have a Yamaha dealer re-
pair it if it does not function proper-
ly.
EAU15321
Ignition circuit cut-off system
The ignition circuit cut-off system (com-
prising the sidestand switch, clutch
switch and neutral switch) has the fol-
lowing functions.
● It prevents starting when the trans-
mission is in gear and the side-
stand is up, but the clutch lever is
not pulled.
● It prevents starting when the trans-
mission is in gear and the clutch le-
ver is pulled, but the sidestand is
still down.
● It cuts the running engine when the
transmission is in gear and the sid-
estand is moved down.
Periodically check the operation of the
ignition circuit cut-off system according
to the following procedure.
WARNING
EWA10260
● The vehicle must be placed on
the centerstand during this in-
spection.
● If a malfunction is noted, have a
Yamaha dealer check the sys-
tem before riding.
U5JW12E0.book Page 17 Wednesday, April 28, 2004 10:24 AM