Specifications

Quick Guide
51
TYROS Owner’s Manual
Reference on page 128
49
Saving and Recalling Custom Panel Setups — Registration Memory
Saving your Panel Setups to a Registration Memory
1
Set up the panel controls (such as voice, style, effects,
and so on) as desired.
2 Press the [MEMORY] button in the REGISTRATION
MEMORY section.
3 Press the numbered [REGISTRATION MEMORY] button to which
you wish to memorize the panel setup.
4 Memorize various panel setups to other buttons by repeating steps
#1 - #3.
5 Referring to the instructions on page 52, save the eight memorized
buttons as a single Registration Memory bank to the User drive
(page 30).
Since the TYROS is such a sophisticated instrument
with such a variety of controls and functions — voice,
style, and effect settings, just to name a few — it may
be difficult to get a handle on them all. This is where
the convenient Registration Memory can help. It
allows you to save virtually all panel settings to a Reg-
istration Memory setting, and then instantly recall
your custom panel settings by pressing a single but-
ton.
• For a list of Registration Memory setup parameters, refer to the separate Data List.
12345678
F
G
H
I
J
MEMORY
REGISTRATION MEMORY
You can determine whether the
settings are to be memorized (on)
or not (off) for each parameter
group. Enter checkmarks only to
those parameter groups you want
to be memorized.
Moves the cursor to the parameter group. You can
move the cursor by using the [DATA ENTRY] dial.
Cancels the regis-
tration and returns
to the previous dis-
play.
Enters a checkmark to
the selected box (param-
eter group).
Removes the checkmark
from the selected box
(parameter group).
• When a checkmark is entered to the SONG box, the
current path (currently selected folder) of the song
file can be memorized to Registration Memory.
The path for DOC or Disklavier Piano Soft disks,
however, cannot be memorized to Registration
Memory. If you wish to memorize the path for DOC
or Disklavier Piano Soft disks, copy the desired files
to the User drive and memorize the corresponding
User drive path.
MEMORY
REGISTRATION MEMORY
The memorized button becomes red.
MEMORY
REGISTRATION MEMORY
The button to which the panel setup has just been memorized lights red and the
button to which the panel setup was previously memorized lights green – the lit
buttons indicating that each contains panel setup data.
• Any panel setup previously
memorized to the selected
REGISTRATION MEMORY but-
ton (indicator is green or red)
will be erased and replaced by
the new settings.
• The panel settings memorized
via step #1 through #4 are
stored temporarily on RAM
(page 65). Therefore, they will
be lost if you change the Regis-
tration Memory bank (page 52)
or you turn the power off with-
out executing step #5.