Specifications

1 STOP
Functions as an off/on switch for the rhythm pattern in the middle of
rhythm playback.
2 ENDING
Switches the rhythm to the Ending pattern, after which the rhythm is
stopped.
3 FILL (Fill In)
Switches the rhythm to the Fill In pattern.
● GLIDE
Selection of footswitch control over Glide. Pressing the footswitch
immediately lowers the pitch of the selected voice or voices by a half
step. When the Glide setting is chosen, the following display appears:
The Glide function can be applied to any one or all of the voice sections shown
in the display: Lead, Upper, and Lower. Select the desired voice section(s).
Knee Lever
The knee lever, located on the underside of the keyboard panel, can be used
to turn the following functions on and off: Melody On Chord and the Sustain
effect.
● Sustain
To select knee lever control over Sustain:
Make sure that the Upper and/or Lower Sustain effect panel controls have
been turned on; otherwise, the knee lever will have no effect.
To use the knee lever:
Fold the knee lever down and press it to the right with your knee when you
want to have sustain.
When the knee lever is vertical:
The sustain effect is cancelled.
When the knee lever is continuously pressed to the right:
The sustain effect is on.
When the knee lever is folded up:
The sustain effect is applied constantly, as long as the front panel sustain
buttons are on.
<FOOT SW>MODE:GLIDE
„LEAD ŒUPPER ŒLOWER
Selects LEAD. Either of these selects LOWER.
Selects UPPER.
90
8. Footswitches and Knee Lever
When using the footswitch to
control Glide, be careful to keep
pressing the footswitch for as
long as you want Glide to remain in
effect.
When the Glide function is
applied, Vibrato is not effective.
NOTE
NOTE
(ON)
(ON)
(OFF)