Specifications

58
6. Music Disk Recorder
Playback
You can play back your recorded performance by simply pressing the PLAY button. Registrations and other data
will be recalled to the Electone.
(1) To play back a song:
1. Select the number of the song you wish
to play back by using the SONG SELECT
buttons.
2.
Press the PLAY button.
The PLAY lamp lights up and small bars move across the display,
indicating that the M.D.R. is resetting registrations on the
Electone.
3. Playback of the song begins after the
Electone data is reset and the song time is
shown on the M.D.R.'s display.
Playback automatically stops at the end of a song. You can,
however, stop playback in the middle of a song by pressing the
STOP button.
If you have recorded the Lead part separately:
Turn on the Lead part for playback by holding down the SHIFT
button and simultaneously pressing the appropriate button in
the PLAY section (as shown in the illustration on the right).
PAUSE STOP PLAY SONG SELECT RECORD
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
CUSTOM PLAY
SHIFT
RECORD PLAY
FORMAT
SONG
REPEAT
FROM SONG DEL.
SONG COPY
TO
MUSIC DISK RECORDER
TEMPO +–
01
PAUSE STOP PLAY SONG SELECT RECORD
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
CUSTOM PLAY
SHIFT
RECORD PLAY
FORMAT
SONG
REPEAT
FROM SONG DEL.
SONG COPY
TO
MUSIC DISK RECORDER
TEMPO +–
---
PAUSE STOP PLAY SONG SELECT RECORD
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
CUSTOM PLAY
SHIFT
RECORD PLAY
FORMAT
SONG
REPEAT
FROM SONG DEL.
SONG COPY
TO
MUSIC DISK RECORDER
TEMPO +–
0 0:0 5
Never turn off the power switch when a floppy disk
is still engaged in the M.D.R. disk drive slot. Also
do not press the Eject button during recording or
playback.
PAUSE
SHIFT
RECORD PLAY
(K.PERC.)(LEAD)(K.PERC.)(LEAD)
REM. MEM.
01