Owner`s manual
Table Of Contents
- CONTENTS
- SAFETY INFORMATION
- LOCATION OF IMPORTANT LABELS
- DESCRIPTION
- CONTROL FUNCTION
- PREPARATION
- PRE-OPERATION CHECK
- OPERATION
- PERIODIC MAINTENANCE
- STORAGE
- TROUBLESHOOTING
- SPECIFICATIONS
- CONSUMER INFORMATION
- EXHAUST EMISSION CONTROL SYSTEM AND COMPONENTS
- WIRING DIAGRAM
- YAMAHA MOTOR CORPORATION, U.S.A. EF SERIES GENERATORS 3-YEAR LIMITED WARRANTY
- YAMAHA OUTDOOR POWER EQUIPMENT CALIFORNIA EVAPORATIVE EMISSION CONTROL WARRANTY STATEMENT
- YAMAHA MOTOR CORPORATION, U.S.A. SMALL OFF ROAD ENGINES CALIFORNIA EMISSION CONTROL WARRANTY
- YAMAHA EXTENDED SERVICE (Y.E.S.)
– 35 –
Engine
Perform the following steps to protect the cylinder, pis-
ton ring, etc. from corrosion.
1. Remove the spark plug cap and spark plug, pour
about one tablespoon of SAE 10W-30 or 20W-40
motor oil into spark plug hole and reinstall the
spark plug only.
2. Turn the engine switch to “START” and crank the
engine several seconds with ignition off to coat the
cylinder walls with oil.
3. Clean exterior of the generator and apply a rust
inhibitor.
4. Store the generator in a dry, well-ventilated place,
with the cover placed over it.
5. The generator must remain in a vertical position
when stored, carried or operated.
6. The caster lock lever should be in the “Lock” when
stored or operated.
788-7XFg
712-7XF
7XF-28199-12_b 2011.3.21 16:06 Page 35