Owner`s manual

34
5. Remove the screws, and then pull outward on the
areas of front cover shown.
1 Screws
2 Front cover
6. Drain the fuel remaining in the carburetor into an
approved container by loosening the drain screw
on the carburetor float chamber.
1 Drain screw
7. Tighten the drain screw.
8. Turn the engine switch to OFF.
9. Turn the fuel cock knob to OFF.
10. Install the cover and tighten the screws.
1
707-7XFf
11. Tighten further if any screws, bolts and nuts are
loose.
12. Store the generator in a dry, well-ventilated place,
with the cover placed over it.
7XF-28199-12_b 2011.3.21 16:06 Page 34