Owner`s manual

1 Upper level
5. Install the cover and tighten the screws.
– 12 –
7DK-031
1
7DK-033
700-119
1
AE00222
Engine oil
The generator has been shipped without engine oil.
Do not start the engine till fill with the sufficient
engine oil.
1. Place the generator on a level surface.
2. Remove the screws 1, and then remove the cover
2.
NOTICE
1
2
7DK-030
4. Fill the specified amount of the recommended
engine oil, and then install and tighten the oil filler
cap.
Recommended engine oil:
å
YAMALUBE 4 (10W-40),
SAE 10W-30 or 10W-40
∫
SAE #30
ç
SAE #20
∂
SAE 10W
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
0.4 L (0.42 US qt, 0.35 lmp qt)
0°C
å
YAMALUBE 4 (10W-40)
∂
SAE 10W
ç
SAE #20
∫
SAE #30
32°F
25°C
80°F
3. Remove the oil filler cap 1.
7DK-9-10 09.1.27 1:46 PM Page 12