User Manual

Screen Functions

 PROTECT

Turns protected for a stored preset on/off.

Set this to ON to prevent presets from being overwritten (STORE), deleted (CLEAR) or

preset title changes (TITLE). A key mark (page 13) will appear on the left side of the pre-

set title on the PRESET screen.

Sets the HPF (high-pass filter) cutoff frequency.

Select OFF or set a specific frequency.

Sets the LPF (low-pass filter) cutoff frequency and the polarity.

q LPF

Select the LPF cutoff frequency.

w POLARITY

Select the polarity. When set to INVERTED, a Ø symbol will appear on the HOME

screen.

Switches a D-CONTOUR preset.

Set to the optimal frequency response characteristics according to the application.

• OFF (NORMAL): Turns D-CONTOUR off. This is a general-purpose frequency response

characteristic setting.

• FOH/MAIN: Boosts the high and low frequency components so that the frequency

response characteristic is suitable for main speaker use. The boost amount is automati-

cally adjusted to provide well-balanced, clear audio based on the volume.

• MONITOR: Reduces the low frequency range, which could otherwise tend to be boomy

if the speaker is set directly on the floor, providing vital clarity when using as a floor mon-

itor. This reduces latency and changes the phase characteristics.

Be aware that using RESTORE FROM USB (page 23, “ DEVICE BACKUP” w) will overwrite presets

even if they are protected.

NOTE

HPF Screen

Full range

LPF Screen

Subwoofer

D-CONTOUR Screen

Full range