User Manual

Reference
34
Function Category Settings Default value Setting range
Full range Subwoofer
Page
number
Standard Dante Standard Dante
METER Input Meter Shows analog input signal levels. (On
Dante models this will appear as
ANA.)
— -∞ to 0dBFS  (×2)  (×2)  (×2)  (×2) 11
Input Meter (DNT) Shows digital input signal (Dante) lev-
els.
— -∞ to 0dBFS  (×2)  (×2) 11
UNIT ID Shows the ID assigned so that DZR-D
or DXS-XLF-D series devices on the
Dante network can be recognized.
01 01 to FE 
11, 24,
25
LABEL Shows the label. — 12 characters 11, 24
MASTER Level Sets the output level. (Unit: dB) 0.0dB -∞, -80 to +10.0dB   11
SP Output Meter Shows the output level. — -∞ to 0dBFS   11
Protection
(THERMAL, MUTED)
Appears when safeguard functions
have been activated.
Hidden THERMAL, MUTED 11
MUTED from REMOTE Mutes audio from an external device. Off — 28
Function Category Parameter Default value Setting range
Full range Subwoofer
Page
number
Standard Dante Standard Dante
TUNING HPF OFF, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz,
110Hz, 120Hz
OFF 60Hz to 120Hz  11, 15
LPF 60Hz, 70Hz, 80Hz, 90Hz, 100Hz,
110Hz, 120Hz
120Hz 60Hz to 120Hz 
11, 15
POLARITY NORMAL NORMAL, INVERTED 
D-CONTOUR OFF (NORMAL), FOH/MAIN, MONI-
TOR
OFF (NORMAL)
OFF (NORMAL), FOH/MAIN,
MONITOR
 11, 15
D-XSUB OFF (NORMAL), BOOST, XTEND LF OFF (NORMAL) OFF (NORMAL), BOOST, XTEND LF 11, 16
EQ (6 bands) ON, OFF ON ON, OFF 
11, 16
BYPS <Bypass> ON ON, OFF  (×6)  (×6)  (×6)  (×6)
FREQ <Frequency> <Each Band> 20.0Hz to 20.0kHz  (×6)  (×6)  (×6)  (×6)
GAIN 0.0 -10.0 to +10.0dB  (×6)  (×6)  (×6)  (×6)
Q 2.00 0.7 to 10.0  (×6)  (×6)  (×6)  (×6)
TYPE PEQ
PEQ, LO SHELF 6dB,
LO SHELF 12dB, HI SHELF 6dB,
HI SHELF 12dB, HPF, LPF
 (×6)  (×6)  (×6)  (×6)
DELAY ON, OFF ON ON, OFF 
11, 16
ms 0.0ms 0.0 to 140.0ms 
m 0.00m 0.00 to 48.10m 
ft 0.0ft 0.0 to 157.8ft 
CARDIOID OMNI (FRONT), CARDIO-2 (REAR),
CARDIO-3 (REAR)
OMNI (FRONT)
OMNI (FRONT), CARDIO-2 (REAR),
CARDIO-3 (REAR)
11, 17
Function Tree