Specifications

32
LOWER UNIT & POWER TRIM & TILT/MIDSECTION TOOLS
Part# Description/Use Application
3 CYLINDER 4-STROKE
YB-06063 Driveshaft Needle Bearing Remover/Installer
When used with Driver Handle YB-06071, this attachment
will remove the lower driveshaft bearing. For installation of
the bearing, Driveshaft Bearing Depth Plate YB-34473 is
required.
F30, F40
YB-41446 Forward Gear Outer Race Installer
When used with Driver Handle YB-06071, this is used to
install the forward gear shims and outer race in the gear
housing.
F30, F40
YB-34473 Driveshaft Bearing Depth Plate
It is used with Driveshaft Needle Bearing Remover/Installer
YB-06063 and Driver Handle YB-07071. This plate properly
sets the driveshaft lower bearing depth.
F30, F40
YB-06110 Bearing/Oil Seal Depth Plate
It is used with Driver Handle YB-06071. This adaptor
properly installs the pinion shims and upper bearing
outer race.
F30, F40
YB-06175-2B Trim Cylinder Wrench
This wrench is specially designed to remove and install the
trim cylinder end cap.
F25
POWER TRIM & TILT/MIDSECTION TOOLS