I © ® I ooo 0 I, OWNER'S MANUAL
RISK OFELECTRIC SHOCK DONOTOPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC INFORMATION 1. IMPORTANT NOTICE : DO NOT MODIFYTHIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry, and clean place with at least 5 cm above, behind and on the both sides of this unit - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
• 5-Disc Video, Auto-changer for playing audio CD and Video CD • CD-R and CD-RW • MP3 format • PLAYXCHANGE; playing • DVD- Disc changing capability while and 1 COAXIAL digital outputs .................................. Before starting play .................................... Playing a disc ............................................. Multi-speed play ......................................... Using a disc's menu ................................... Enhancing video quality ................
Check that the following items are included in your package. Remote control 5"_ eb5 Batteries (AA, R06, UM-3) RCA pin cable (audio/video) 5 3123153123 ?rnD@ I c3ooc I I I r=7oc3_ NI U 3C3ED C3 CD C3 U_ (U.S.A. and Canada models) This DVD changer is designed of disc only. Never attempt into this unit because (Australia model) for use with following types to load any other type of disc it may damage rl0 FSSC DIGITAL Manufactured this unit.
• Region management information This DVD player is designed to meet DVD standard that supports region management system. Check the regional code number marked on the disc packages. If the number does not match this unit's region number (see the below table or the back of this unit), this unit refuses to play that disc. Model U.S.A. and Canada models Region number of this unit Discs can be played _, _ or a mark which includes the region number ' 1'.
Front Panel qP I) ® .......... .... I, ,I ® (U.S.A. mode] Remote Control O POWER Press to turn the power on and off. O Disc tray 0 @ O O Up to 5 discs can be loaded 0 on this tray. _ (OPEN/CLOSE) Press to open and close the disc tray. O PLAYXCHANGE @ (p.12) O _ (STOP) Press to stop playback. 0 0 0 0 0 _D(PAUSE) Press to pause. 0 _>(PLAY) Press to start playback. 0 @ O @ ON: front panel PROGRESSIVE: remote control [U.S.A. 0 \ J (U.S.A.
_eIAVlll,7{eIm,7t_lg_,7t,vlL_[_].lefEllD] _) GROUP (p.15) _) Display panel (D PLAY MODE Press to switch among random play, program play, and normal play. _) REPEAT (p.17) _) MARKER • (p.20) _) Cursor _) ON SCREEN ENTER (p.21) Press to turn the on-screen icons on and off on the video monitor. _) RETURN (p.14, 21,25) Press to go back to the previous screen when operating in the menu screen. _) Numeric A-B (p.18) buttons, Use to select and determine an item on menu screen, etc.
_0 emO e e e E ...................................... !REP1 solsc MPEGpcM vss 00 O ® I), @, Q ® _) Disc type indicators One of these numbers lights up to show the currently selected disc, which is loaded on the guide of the corresponding number. Indicates the type of disc. For example, DVD and AUDIO lights up when playing a DVD-Audio disc. Q GROUP Lights up during playback. The current (or programmed) group number appears below the indicator.
[] Turn the remote control over and slide the battery compartment cover in the direction of the arrow. [] Insert the batteries (AA, R06, UM-3 type) according the polarity markings on the inside of the battery compartment. [] Close the battery compartment cover. _3 If the remote • • • • control operates only when it is close to the unit, the batteries are weak. Replace all the batteries with new ones. Use only AA, R06 or UM-3 batteries for replacement. Be sure the battery polarity is correct.
m Never connect this unit and other equipment to power supply until all connections have been completed. Be sure all connections are made correctly, observing the color-coding of terminals of both this unit and the equipment to be connected. Also refer to the instructions of the equipment to be connected. • Digital outputs This unit hasCOAXIAL and OPTICAL digital output terminals.
_'li'li'l_*liPliT If your AV amplifier (U.S.A. model) has video terminals, connect amplifier (and then to your video monitor) use one video monitor for several different (LD, VCR etc.) by simply selector switching your so that you can video sources the input source of your amplifier. This unit has three types of video output of them in accordance equipment terminals. with the input terminals Use one of the to be connected.
These terminals are used for custom installation system that transmits remote control signals via cables. Connect this unit's REMOTE CONTROL IN to the Remote control output of the control unit of your system. By connecting this unit's REMOTE CONTROL OUT to another piece of equipment's Remote control input terminal, you can also operate that equipment with the system remote control. i!iii@i! After completing all connections, connect the AC power cord to an AC power outlet.
To play a disc properly, equipment • connected you need to adjust If your AV amplifier digital setting). the formats of audio and video signals output from this unit in accordance with the to this unit. See p.25 to 27.
DISC SKIP PLAYXCHANGE • To stop playback Press cl (STOP). This unit memorizes where cl (STOP) as this unit is turned on (_ indicator When PLAY STOP you press _> (PLAY) in this status, as long on the display). playback resumes from where it was stopped. To clear the memory, indicator press cl (STOP) once more so that the goes off. • Selecting another • This function a disc. This function disc cancels may not work the resume with some function.
",g'_F.'q[Olel".J_,7_Wl[elA PLAY PAUSE • To select a specific track _ rd'R Enter a desired track number using numeric buttons. To select a two-digit number, press >10 and then enter the upper figure and the last figure successively. Example 1 Press 2 Press 3 Press (to select track 17): >10. 1. 7. • Search SKIP/SLOW/SEARCH Press SLOW/SEARCH c_> (or _<1) on the remote control to search forward (or backward). or Press and hold c_>F_ (or _<1/_<1) on the front panel to search forward (or backward).
Discs may contain multiple audio tracks, subtitles, index and bonus materials such as movie trailers and cast information, And many of them have menu screens that enable you to control these features. This section gives you general instruction about how to operate these screens. However, the operation methods may differ depending [] etc. on the disc. PressTOP MENU or MENU during playback to show • menu screen. With some discs, menu screen appears automatically when you start playback.
",gz l..'q[o,lol ".,l-_l,7_ Wl [ol A This section explains about some features particular to DVD-Audio. Though most of the content selection can be controlled using a disc's menu like DVD-Video, there exists in a DVD-Audio the unit called 'group' that is something equivalent to DVD-Video's 'title'. • To play a track on a specific [] group Press GROUP. The group and track icons appears on the video monitor.
Some discs are encoded gual subtitles etc. to see which AUDIO _LE A,V, _> RETURN with several or multiple camera feature audio angles. tracks, multilin- Refer to disc jacket is supported. • Audio tracks Different audio track languages and/or selected if available on the disc. Press AUDIO The Audio • formats can be during play. track icon appears on the video monitor. Pressing the button repeatedly toggles through all audio tracks recorded on the disc.
This function allows you to play your desired chapter, track or disc repeatedly. • t ® °+ t TRM,+ _.r., ..... +.+r.r ,..,,.. ,..,EM ..l ,I' $ +J.+I...r. r...r,r EA I J # @ CHAPTER REPEAT: The current chapter is played repeatedly. @ TITLE REPEAT: The current title is played repeatedly. @ ALL REPEAT: All the discs loaded on the tray are played repeatedly. @ REPEAT OFF: Repeat play mode is canceled. ""+ . +..:, ....L: R""'-' .r.r .r.A'1" "" or m+ '-"-._r+ ..... '-" "-r r+..r,r'-""'-'EAT l t @ r+..
This function allows you to specify between them repeatedly. [] Press A-B during A-B two points and play play at the point where want to start A-B repeat. 'REP' and 'A-' light up and 'B' flashes [] Press A-B at the point where you on the display. you want to end A-B repeat. 'REP' and 'A-B' of the section appear between on the display and repeat play point A and B starts. • To cancel A-B repeat Press A-B repeatedly off.
_'.]".t,_W l _, _ hV[eB jI_l,_B".if ,_| "dF;'.] _[e ]lJ,_lA_ [W You can enjoy listening to your favorite tracks selected from one or more discs in any desired order by programming tracks. PLAY [] Press D (STOP) to stop play. [] Press PLAY MODE repeatedly until PROG lights up on the display. The display shows the step information. [] Press DISC l m5 to select the disc. • When programming DVD-Audio, press GROUP to specify the group. [] Press numeric buttons to select the track.
This feature allows you to mark up to 5 points can quickly return to those points later. [] MARKER Press MARKER. The marker [] Cursorbuttons(_,_), ENTER icon appears Press the cursor of five asterisks. The selected [] Press on the screen. buttons asterisk (<_, E>) to select one is highlighted. ENTER. The selected asterisk turns to be the bookmark • To recall a bookmarked Press the cursor buttons number so that you number. scene (<_, _>) to select a bookmark and press ENTER.
You can control various items using on-screen menu bar. [] Press ON SOREEN. Each time ON SCREEN is pressed, the menu bar changes as below. @ Icons for disc menu @ @ Icons for player menu ,I, @ Shuttle screen Off Off Icons for player menu [] t t Press the cursor buttons (% _) to item you wish to adjust. The selected item is highlighted. • Icons for player menu has 4 different below. To switch the menu bar, select icon and then press the cursor buttons select the menu bars as the leftmost (A,V).
_e]A_5.'f_]:t:l:hV|l_l:hVll example: DVD-Video Title Angle number number Track number Playback Chapter Indicates or off. number Group number Page control whether playback control is on number [] Language Time index (hour:minute:second) You can start play from by specifying Changing the elapsed the time Track elapsed Track remaining point time.
• Play mode menu • Audio menu example: DVD-Video example: DVD-Video A-B repeat (_ p.18) [ENTER] (start point) _ [ENTER] (finish point) To cancel Virtual [ENTER] surround Bookmarks (_ p.20) You can mark up to 5 points. To mark a point [<_,_>] _ [ENTER] (at the desired point) with multi-channel mode you to enjoy speakers with some connecting discs). surround-like when [4, _] _ [ENTER] HP (with menu (may not effective the feature to your AV amplifier.
When PROGRESSIVE Digital picture mode To select the picture mode: [£,V] N: Normal models) Digital picture mode To select the picture mode: [£,V] N: Normal C: Cinema image (suited for movie viewing) U: User mode C: Cinema image (suited for movie viewing) To change the user mode 1 Select User mode and press E> 2 Press (<_, E>)to select the item you wish to change. 3 Press (£,V) to change the setting. The following items are also displayed when 'ou select 'U'. Contrast is on (U.S.A.
With the setup menu, you can change this unit's system defaults to suit your preference and your home theater system. Some items must be adjusted to play a disc properly. This section shows common procedures (some items require additional steps). Use the remote control to operate the setup menu. [] ENTER IRN Press SET UP while playback is stopped. The menu screen appears on the video monitor. IVJ Press the cursor buttons (% _) to select a menu group. There are five menu groups.
I_l=ilq_l'tl_ff|= The below chart shows the menu groups and each items. In the 'Options' column, the factory settings are underlined. Menu Items groups Disc See Options Audio _ (U.S.A. and Canada Select the preferred audio track language. models) French Spanish Original German Italian Other**** p.27 and 28 for details. (Australia model) French Spanish Subtitle _ Select the preferred subtitle language. Original (U.S.A.
q_lq@'_FlflI Menu Items groups Audio Dolby Decide Digital _ the signal type that output 'Bitstream' when connected 'PCM' when not. Options Bitstream from device this unit's has Dolby digital Digital outputs. decoder. PCM Select Select DTS Digital Surround _ Decide the signal type that output from this unit's digital outputs. Select 'Bitstream' when connected device has DTS decoder. Select 'PCM' when not.
Depending on software capability, you can prevent discs or scenes with objectionable material from being played according to your desired rating. You can select the level and lock it by designating password. Level 8 All DVDs can be played. Level 7 to 1 Level of restriction becomes severer as the number gets smaller. ENTER Level 0 • Setting Numeric buttons All DVDs cannot be played. method _Jl Follow steps 1 to 4 of 'Operating select the desired level. the Setup Menu' (see p.
• Output i Mai i mode @ Change the settings of each speaker in accordance with your speaker system. Exit _11 Press the cursor buttons (<, c_, A,V) to select a speaker and press ENTER. [] Example: Left surround (rear) speaker @ when the speaker is not used @ when using a large speaker capable of low-frequency (under 100 Hz) output. @ when using a small speaker that is not capable of low-frequency output. Test signal (L)@(L)@@ Press the cursor buttons (A,V) to select the setting and press ENTER.
If this unit fails to operate normally, is not listed in the PROBLEM center. check the following column, PROBLEM This unit on when switch is This unit normally. fails to turn the POWER pressed. does not work Playback does not start. disconnect POSSIBLE The power cord is not completely to determine the fault can be corrected, your authorized WHATTO or the plug Firmly connect the power YAMAHA Refer to Page DO cord. The disc is damaged. Check the disc carefully; replace it if necessary.
IiloIq'l_-'Flil, l,llli'l_ PROBLEM POSSIBLE CAUSE No sound when playing a disc encoded with DTS. Incorrect setting(s) at the audio section of 'Setup menu' on this unit or at 'input mode' on your amplifier. No sound from speakers. With some DVD-Audio, specified by the disc. some Refer to Page WHAT TO DO Select proper settings. 26, 27 output channels are Incorrect 'Speaker settings'. (when 6CH DISCRETE outputs are connected to your amplifier) Change the settings to suit your speaker system.
• Audio section Frequency • General response Power supply: DVD (48 kHz sampling): ......................... 2 Hz to 22 kHz [U.S.A. DVD (96 kHz sampling): ......................... 2 Hz to 44 kHz [Australia DVD Audio (192 kHz sampling): CD, Video CD: ............. .............................................. 2 Hz to 88 kHz Power and Canada model] consumption: models] ....................... 120 V, 60 Hz ......................................... 240 V, 50 Hz ......................
