Specifications

DSP5D GENERAL SPECIFICATIONS
Internar Signal Processing 32-bit (Accumulator 58-bit)
Sampling Frequency Internal 44.1kHz, 48kHz, 88.2kHz, 96kHz
External Normal rate: 44.1kHz — 48kHz
Double rate: 88.2kHz — 96kHz
Signal Delay Less Than 2.3ms INPUT to OMNI OUT (@ Fs = 48kHz)
Less Than 1.15ms INPUT to OMNI OUT (@ Fs = 96kHz)
Total Harmonic Distortion Less Than 0.05% 20Hz - 20kHz @+4dBu into 600Ω
INPUT 1 — 48ch to OMNI OUT 1-24ch
(@ Sampling frequency = 44.1kHz or 48kHz)
Input Gain = Min. Less Than 0.05% 20Hz - 20kHz @+4dBu into 600Ω
INPUT 1 — 48ch to OMNI OUT
(@Sampling frequency = 96kHz)
Requency Response 1.0, -3.0dB 20Hz — 20kHz @1kHz into 600Ω
INPUT 1 — 48ch to OMNI OUT
(@ Sampling frequency = 44.1kHz or 48kHz)
1.0, -3.0dB 20Hz — 40kHz @1kHz into 600Ω
INPUT 1 — 48ch to OMNI OUT
(@ Sampling frequency = 96kHz)
Dynamic Range 110 typ. DA Converter (OMNI OUT)
(@ Sampling frequency = 44.1kHz or 48kHz)
108 typ. AD + DA (to OMNI OUT)
GAIN; Min., PAD: ON (@ Sampling frequency = 44.1kHz or 48kHz)
110 typ. DA Converter (OMNI OUT)
(@ Sampling frequency = 96kHz)
106 typ. AD + DA (to OMNI OUT)
GAIN; Min., PAD: ON (@ Sampling frequency = 96kHz)
Hum & Noise 128dBu Equivalent Input Noise (20Hz - 20kHz)
Rs=150Ω, Input Gain = Max. -86dBu Residual Output Noise, OMNI OUT
Crosstalk @1kHz -80dB adjacent INPUT channels(1 — 48ch)
-80dB INPUT to OMNI OUT
Power Requirements AC 100 — 240V 50/60Hz
Dimensions W x D x H (mm) 480 x 453 x 488
Net Weight 38kg
Operation free-air Temperature Range 10 — 35˚C
Storage Temperature Range -20 — 60˚C
22 23
5. Opera House with Orchestra Pit and Stage DSP5D Units
In this system, which is designed primarily for an opera-house type situation, one DSP5D unit is located in the orchestra
pit while the second DSP5D unit is located on stage. As in the preceding systems a DCU5D is connected to the console at
the rear of the house via the D-sub 68-pin and CAT5 cascade cables, and an Ethernet cable connects to the first DSP5D.
The second DSP5D is connected to the first DSP5D via a DCU5D unit in the same way. This makes 48 microphone/line
inputs available in the orchestra pit, and another 48 microphone/line inputs available on stage. The DSP5D head amps
can be controlled directly from the PM5D-RH V2 console. A pair of DME64N units connected to the stage DSP5D outputs
perform processing and distribution for the FOH speakers, box-seat speakers, and a back-stage speaker system. The
orchestra pit DSP5D directly feeds powered monitors for the musicians in the pit.
(male) (female)
CAT5 Cable
D-sub 68pin (male) Cable
D-sub 25pin (male) Cable
XLR Cable
Speakon Cable
PM5D (RH)
OUTCASC
ASC
ADE IN
ADE IN
CASC
ASC
ADE IN
ADE IN
CASCADE
CASCADE IN OUT CASCADE IN
DSP5D-1
DCU5D-1
Stage
Ochestra Pit
T5n
DME64N
AMP Rack
Dressing Room
IS1218
IF2115
IS1218
IF2115
AVIOM 16/o-Y1
IF2108
MY8-DA96
T5n
DSP5D-2
DCU5D-2
PM5D V2, PM5D-RH V2 GENERAL SPECIFICATIONS
All faders are nominal when measured. Output impedance of signal generator:150Ω
Internal Signal Processing 32-bit (Accumulator 58-bit)
Sampling Frequency Internal 44.1kHz, 48kHz, 88.2kHz, 96kHz
External Normal rate: 44.1kHz — 48kHz
Double rate: 88.2kHz — 96kHz
Signal Delay Less Than 2.3ms INPUT to STEREO A, B (@ Fs = 48kHz)
Less Than 1.15ms INPUT to STEREO A, B (@ Fs = 96kHz)
Fader Moterized, Stroke: 100mm All Faders
Fader Resolution +10 — -138, -∞dB All Faders
Total Harmonic Distortion Less Than 0.05% 20Hz — 20kHz @+4dBu into 600Ω
INPUT 1 — 48ch to STEREO A,B OUT (@Sampling frequency = 44.1kHz or 48kHz)
Input Gain = Min. Less Than 0.05 % 20Hz — 40kHz @+4dBu into 600Ω
INPUT 1 — 48ch to STEREO A,B OUT (@Sampling frequency = 88.2kHz or 96kHz)
Frequency Response PM5D 0.5, -1.5dB 20Hz — 20kHz @1kHz into 600Ω
INPUT 1 — 48ch to STEREO A,B OUT
(@Sampling frequency = 44.1kHz or 48kHz)
0.5, -2dB 20Hz — 40kHz @1kHz into 600Ω
INPUT 1 — 48ch to STEREO A,B OUT
(@Sampling frequency = 88.2kHz or 96kHz)
PM5D-RH 1.0, -3.0dB 20Hz — 20kHz @1kHz into 600Ω
INPUT 1 — 48ch to STEREO A,B OUT
(@Sampling frequency = 44.1kHz or 48kHz)
1.0, -3.0dB 20Hz — 40kHz @1kHz into 600Ω
INPUT 1 — 48ch to STEREO A,B OUT
(@Sampling frequency = 88.2kHz or 96kHz)
Dynamic Range 110 typ. DA Converter (STEREO A, B OUT)
(Max. level to noise level) (@Sampling frequency = 44.1kHz or 48kHz)
108 typ. AD + DA (to STEREO A, B OUT),
GAIN: Min., PAD: ON (@Sampling frequency = 44.1kHz or 48kHz)
110 typ. DA Converter (STEREO A, B OUT) (@Sampling frequency = 96kHz)
106 typ. AD + DA (to STEREO A, B OUT),
GAIN: Min., PAD: ON (@Sampling frequency= 88.2kHz or 96kHz)
Hum & Noise -128dBu Equivalent Input Noise (20Hz — 20kHz) STEREO A, B OUT
Rs = 150Ω -86dBu Residual Output Noise, ST Master Off.
Input Gain = Max.
Input Pad = 0dB
Input sensitivity = -60dB
Maximum Voltage Gain
84dB INPUT 1 — 48 to STEREO A, B OUT, Rs = 150Ω, Input Gain: Max., PAD: Off
@1kHz 84dB INPUT 1 — 48 to MIX OUT/MATRIX OUT/CUE OUT/MONITOR OUT
(via STEREO Bus)
* Input Gain = Min.
* Hum & Noise is measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite
dB/octave attenuation.
* Total Harmonic Distortion is measured with a 18dB/octave filter @80kHz
* Dynamic range is measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite
dB/octave attenuation.
Crosstalk -80dB Ajacent Input 1 — 48
@1kHz -80dB Input to Output
Power Requirements PM5D 480W DC 24V 20A (Use PW800W Only)
PM5D-RH 528W DC 24V 25A (Use PW800W Only)
Dimensions W x D x H (mm) 1551 x 950 x 283
Net Weight PM5D: 98kg, PM5D-RH: 97kg
Operation free-air Temperature Range 10 — 35˚C
Storage Temperature Range -20 — 60˚C
LIBRARIES
Name Number Total
Scene Memory Preset 1 + User 500 501
Input Patch Library Preset 1 + User 99 100
Output Patch Library Preset 1 + User 99 100
Input Channel Library Preset 1 + User 199 200
Output Channel Library Preset 1 + User 199 200
Input EQ Library Preset 40 + User 159 199
Output EQ Library Preset 3 + User 196 199
GATE Library Preset 4 + User 195 199
COMP Library Preset 36 + User 163 199
Effect Library Preset 55 + User 145 200
GEQ Library Preset 1 + User 199 200
HA Library Preset 1 + User 199 200
PW800W GENERAL SPECIFICATIONS
Power Requirements 100 — 240V, 50/60Hz 1000W (Max.)
Dimensions W x H x D (mm) 480 x 132 (=3U) x 355
DC Output Voltage 24V
Current 23A (Max.)
Net Weight 10 kg
Operation Temperature Range 10 — 35°C
Storage Temperature Range -20 — 60°C
PW800W OUTPUT SPECIFICATIONS
OUTPUT TERMINAL FORMAT LEVEL CONNECTOR
DC OUTPUT — DC 24V JL05-2A22-14PC 24pin (Male)
DSC5D GENERAL SPECIFICATIONS
Sampling Frequency Nomal rate; 44.1kHz - 48kHz
Double rate; 88.2kHz - 96kHz
Power Requirements 100-240V 50/60Hz
DC IN; XLR-4-32 type (4pin=+12V, 1pin=GND), 12V±5%, 1.5A
Dimensions W x D x H (mm) 480 x 162 x 44
Net Weight 2.3kg
Operation free-air Temperature Range 10 — 35°C
Storage Temperature Range -20 — 60°C
IF2108
IF2108
IF2108
IF2108
IF2108
HEADPHONE
AVIOM A16-II
HEADPHONE
AVIOM A16-II
HEADPHONE
AVIOM A16-II