Specifications
Table Of Contents
- PRECAUTIONS & SAFETY INSTRUCTIONS
- SETUP & ADJUSTMENT
- GENERAL OPERATION
- 2-1. PLAYING A SOURCE
- 2-2. RECORDING A SOURCE TO AUDIO/VIDEO TAPE (OR DUBBING FROM A TAPE TO ANOTHER)
- 2-3. DIGITAL SOUND FIELD PROGRAMS
- 2-4. SELECTING SOUND FIELD PROGRAMS
- 2-5. MUTING THE EFFECT SOUND
- 2-6. SUPERIMPOSED VIDEO PROGRAM/PARAMETER DISPLAY
- 2-7. DESCRIPTIONS OF THE SOUND FIELD PROGRAMS
- 2-8. REMOTE CONTROL “LEARNING” FUNCTION
- CREATING YOUR OWN SOUND FIELDS
- TROUBLESHOOTING
- SPECIFICATIONS
CONNECTING THE MAIN SPEAKERS AND CENTER
SPEAKER(S) TO THIS UNIT
Connect the MAIN speakers to the MAIN speaker output
terminals of this unit.
Connect the CENTER speaker to the CENTER speaker output
terminals. If you will be using one CENTER speaker, connect it to
either the A or B terminals and set the CENTER speaker impedance
switch to “A or B” (bottom position). If using two CENTER speakers,
connect them to the A and B terminals, and set the switch to “A + B”
(top position). If, however, you will not be using a CENTER speaker,
be sure to set the Center Mode to “PHNTM” (phantom). (See page
25.)
15
English
Main speaker Main speaker
Center speaker
Center speaker Center speaker
This unit