User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
363
■ Crossover
When you click the [Crossover] button for the crossover processor, it opens the crossover editor
window.
Name Function
1 Input Meter Displays the input signal level.
2 Output Meter Displays the output signal level.
Section Parameter Setting Range Function
3 Input Gain -∞ to +10 dB Sets the input signal level.
4 Mute ON/OFF Mutes the input signal.
5 Output Gain -∞ to +10 dB Sets the output signal level for each
frequency band.
6 Mute ON/OFF Mutes the output signal for each frequency
band.
7 Navigator Crossover -- This opens the crossover editor window.
8 Delay -- This opens the delay editor window.
9 PEQ -- This opens the parametric equalizer editor
window.
) Compressor -- This opens the compressor editor window.
1
2
3
4
5
679)
8
Crossover Processor II component editor