User Manual

Chapter 3 Main Panel Window

DME Designer Owner’s Manual

137

Remote Connection

Connect the digital mixer to the [REMOTE] connector of one of the DME units, and set the port to be

used for head amp control to “Remote” via the [Internal HA Control] parameter in the “Misc” tab in the

“Utility” dialog box (page 166). The settings for all other DME units should be “OFF”. Use an Ethernet

cable connected to the [NETWORK] connectors to make connections between DME series units.

NOTE

• Only control signals are transmitted and received via the REMOTE connection. Audio connections must be made

separately.

• Connection can also be made to the [REMOTE] connector of a DME unit with built-in head ampliﬁers.

REMOTE REMOTE

DME8i-C

DME4io-C

DME8i-ES

DME4io-ES

DME24N

Ethernet

Digital Mixer

D-SUB 9-pin Cable

Network

Switch