Owner's Manual

Appendix
Options
DME64N/24N Owner’s Manual
60
Control Panel Installation
1. Screw the frame plate to the terminal box.
2. Screw the control panel to the frame plate.
NOTE
• Terminal box not included. Use a standard (US-type) wall box: 3-gang for CP4SF and 1-gang for CP4SW and CP1SF with
depth 44 millimeters or more.
• The screw heads should extend from the frame plate by no more than 3 millimeters.
NOTE
Tighten the screws used to attach the control panel to the frame plate with a torque of less than 1.5 Nm.
CP4SW
1
2
CP1SF
1
2
CP4SF
1
2
Control panel unit Euroblock connected
Frame plate for control
panel mounting
Control panel unit Euroblock connected
Frame plate for control
panel mounting
Control panel unit Euroblock connected
Frame plate for control
panel mounting