Owner's Manual

Panel Operation and Displays
Parameter Edit Displays
DME64N/24N Owner’s Manual
40
Parameter Edit Displays
Parameter Edit displays will appear when the [SCENE],
[MUTE], [MONITOR] or other button is pressed to
allow scene changes, level adjustment, and other settings to
be edited as required. Parameter Edit displays are also used
to edit utility parameters.
In most cases the desired parameter edit page can be
accessed by selecting the item you want to edit in the
appropriate display by using the cursor [E], [ ▲ ], [ ▼ ],
and [F] buttons, and then pressing the [ENTER]
button.
There are basically three types of parameters that can be
accessed via a Parameter Edit display:
•Numeric values
• Lists
• ON/OFF switches
Numeric Parameters
Numeric parameters can be edited in a number of ways,
and depending on the parameter a fader, knob, or
minimum and maximum values may appear to the left of
the numeric value.
A Numeric Value with a fader
A Numeric Value with a Knob
1 Name of parameter selected for editing
2 Fader
3 Knob
4 Minimum and maximum values
5 Current value
Some Parameter Edit displays have just one numeric
parameter, while other may have two or more.
1. Numeric values can be changed by rotating the
dial. Dial rotation produces an immediate,
corresponding change in the selected value.
2. Press the [ENTER] button to close the
Parameter Edit display after the value(s) have
been edited as required.
1. Use the cursor buttons – [E] [ ▲ ] [ ▼ ] [F] –
to select the value to be edited.
1
2
5
4
1
3
5
4
Parameter Edit Display with One Numeric Parameter
Parameter Edit Display with Multiple Numeric
Parameters