Owner's Manual

Panel Operation and Displays
The Panel Buttons and Displays
DME64N/24N Owner’s Manual
38
The Panel Buttons and Displays
By pressing the panel buttons it is possible to select the DME64N/24N Main display, Utility display, and Parameter Edit
displays that allow individual settings to be edited and changed. refer to the pages listed below for more detailed information
about each display.
[HOME] button ➔ Main Display (Page 39)
The Main display can be directly recalled from any display other than the Main display by pressing the
[HOME] button. The Main display shows the current scene information
[HOME] button ➔ User-defined Parameter Page Selection (Page 42)
Pressing the [HOME] button while the Main display is shown sequentially selects the four user-defined
parameter pages.
[MUTE] button ➔ Mute Display (Page 42)
[LEVEL] button ➔ Output Level Display (Page 42)
[SCENE] button ➔ Scene Recall Display (Page 43)/Scene Store Display (Page 43)
These buttons can be pressed from the Main or Utility displays to directly call the related parameter edit
displays.
[MONITOR] button ➔ Monitor Point Selection Display (Page 44)
This function is useful for level monitoring. When the button is pressed the monitor point selection display
will appear, and the spectrum analyzer display will appear when a selection has been made.
[UTILITY] button ➔ Utility Display (Page 47)
The Utility display appears when the [UTILITY] button is pressed for longer than two seconds while the Main
display is showing.
The Utility display includes a number of pages that can be selected in sequence by repeatedly pressing the
[UTILITY] button.
Panel Operation and Displays
HOMEHOME
HOMEHOME
Main display
Switches the pages of the user-defined parameter