User Manual

DM3/DM3 Standard Firmware Update Guide 6
NOTE
- When the UPDATE window appears, the update operation has already started, the operation has
reached 100% completion (Done), or a message prompting to reboot the DM3/DM3 Standard
appears; these are all normal.
- During the update process, the display or the LED indicator may turn off. This is normal
.
7. When a message indicating completion of the update appears, remove the USB flash drive.
8. Confirm the updated version from the SETUP -> ABOUT window.
NOTE
- With DM3 (with Dante module), when the ABOUT screen is displayed immediately after updating,
the Dante version may be displayed as “------ ------- -----”. The version of Dante will be displayed
after about 1 minute. If the Dante version is not displayed, see “If the Dante module update
failed” (page 7).
The firmware update is now complete.
NOTE
Some firmware versions have new default Presets for Scene or Library. To load the new Presets, the
“Initialize All Memories” operation is required. Refer to the “Initialize All Memories” screen of the
“MAINTENANCE” screen in the DM3/DM3 Standard Reference Manual.