User Manual

DM3/DM3 Standard Firmware Update Guide 4
Update Procedure
1. Connect the USB flash drive (formatted in FAT32) to the USB connector of your computer.
2. Copy the “DM3_firmware_v***.bin ” (*** indicates the version number) in the folder extracted
from the downloaded zip file to the root directory of the USB flash drive.
NOTE
Do not place any data other than the DM3/DM3 Standard firmware file on the USB memory.
3. Remove the USB flash drive when the files have been copied.
For more information on removing the USB flash drive, refer to the owner's manuals of your computer
and USB flash drive.
4. Turn off the power to the DM3/DM3 Standard.
5. Connect the USB flash drive to the DM3/DM3 Standard USB connector (upper right), and then
turn on the power to the DM3/DM3 Standard.
An "Update firmware?" message will be displayed.
NOTE
- This display will not appear if the current version of the DM3/DM3 Standard and the version of the
firmware update file are the same.