User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
MIDI (Program Change) screen
Screen for assigning scene memories to MIDI program changes.
a
b c d
a
Program change list
Displays a list of scenes assigned to program changes.
(
Ch :
Displays the channel number.
Displays the bank number when Single and Bank Modes are selected.
(
No :
Displays the program change number.
(
Program Change Event :
Displays the titles of scenes assigned to program changes.
Touch to open the scene selection screen.
b
UP/DOWN buttons
Moves the channels or banks in the program change list up/down.
c
Program change selection buttons
Turns the program change communication signals ON/OFF.
Functions the same as the program change selection buttons on the Setup screen.
95
Screen functions and names > SETUP screen