User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
b
CUE Mode button
Used to switch the CUE mode.
(
Mix CUE :
Enables CUE for multiple channels.
(
Last CUE :
Enables CUE for the last channel selected.
c
PFL Trim setting text box
For adjusting the CUE monitor volume when PFL is selected. It can be set in the range of -30 to +20 dB.
Touch to display the input screen for each value.
d
Mono button
When turned ON, the monitor signal changes to mono.
e
Cue Interruption button
Toggles whether the CUE interrupts the monitor output.
f
Delay button
Delays the monitor signal.
Used when a time difference exists due to distance between the mixer and the FOH speaker.
g
Monitor output button
Turns the monitor output ON and OFF.
The signal is output to the [PHONES] connector regardless of this setting.
h
Monitor selection buttons
For selecting the monitor source.
i
Delay setting text box
Delay can be specified by frame, meter, sample, feet or ms.
The unit can be selected by PREFERENCE screen → Other → Display Delay Scale.
Touch to display the input screen for each value.
j
Monitor level meter
Displays the monitor level.
k
Clear CUE button
Clears all CUE as a batch.
l
Monitor level slider
Adjusts the monitor output level.
The signal is output to the [PHONES] connector regardless of this setting.
Related links
“Checking the CUE signal”(p.249)
73
Screen functions and names > MONITOR screen